€739.00
Features at a Glance
| DUAL SD CARD SLOT SUPPORTS: | 16 MB–2 GB SD cards 4 GB–32 GB SDHC cards64 GB–512 GB SDXC cards |
| CONNECTORS: | XLR/TRS combo jacks (XLR: 2 hot, TRS: TIP hot) |
| INPUT GAIN: | +10 – +75 dB |
| INPUT IMPEDANCE: | 3.3 kΩ |
| MAXIMUM INPUT LEVEL: | +14 dBu (at 0 dBFS, limiter ON) |
| PHANTOM POWER: | +24/+48V 10mA maximum for each channel |
| THD (TOTAL HARMONIC DISTORTION): | 0.009% max (1kHz, 22Hz-22kHz BW, Input Gain min, -10dBu input) |
| INPUT GAIN: | −10 – +55 dB |
| INPUT IMPEDANCE: | 28 kΩ |
| MAXIMUM INPUT LEVEL: | +34 dBu (at 0 dBFS, limiter ON) |
| THD (TOTAL HARMONIC DISTORTION): | 0.010% max (1kHz, 22Hz-22kHz BW, Input Gain min +10dBu input) |
| EQUIVALENT INPUT NOISE: | −127 dBu or less (A-weighted, +75 dB input gain, 150Ω input) |
| FREQUENCY CHARACTERISTICS: | 10 Hz – 80 kHz +0.5 dB/−1 dB (192 kHz sampling rate) |
| A/D DYNAMIC RANGE: | 120 dB typ (−60 dBFS input, A-weighted) |
| CROSSTALK: | −90 dB or less (between adjacent channels, 1 kHz) |
| MIC IN: | ZOOM mic capsule input (use disables Inputs 1/2) |
| SLATE MIC: | Built-in mic for voice memos can freely be assigned to tracks |
| CONNECTORS: | TA3 connectors, balanced output (2: hot) |
| OUTPUT IMPEDANCE: | 150 Ω or less |
| REFERENCE OUTPUT LEVEL: | −10 dBV (Normal Output Type), −40 dBV (Mic Output Type), 1 kHz, 600Ω load |
| MAXIMUM OUTPUT LEVEL: | +10 dBV (Normal Output Type), −20 dBV (Mic Output Type), 1 kHz, 600Ω load |
| CONNECTOR: | 3.5 mm stereo mini unbalanced output jack |
| OUTPUT IMPEDANCE: | 100 Ω or less |
| REFERENCE OUTPUT LEVEL: | −10 dBV (Normal Output Type), −40 dBV (Mic Output Type), 1 kHz, 10kΩ load |
| MAXIMUM OUTPUT LEVEL: | +10 dBV (Normal Output Type), −20 dBV (Mic Output Type), 1 kHz, 10kΩ load |
| CONNECTOR: | 1/4″ unbalanced stereo output jack |
| OUTPUT IMPEDANCE: | 15 Ω or less |
| MAXIMUM OUTPUT LEVEL: | 100 mW + 100 mW (32Ω load) |
| D/A DYNAMIC RANGE: | 106 dB typical (−60dBFS input, A-weighted) |
| SUPPORTED FORMATS: | 44.1/47.952/48/48.048/88.2/96/192kHz, 16/24-bit, mono/stereo/2-10 ch poly, BWF and iXML |
| MAXIMUM SIMULTANEOUS RECORDING TRACKS: | 10 (8 inputs + stereo mix) 8 (with 192 kHz sampling rate) |
| SUPPORTED FORMATS: | 128/192/320 kbps, 44.1/48 kHz, ID3v1 tags |
| MAXIMUM SIMULTANEOUS RECORDING TRACKS: | 2 |
| USING A 32GB CARD: | 30:51:00 (48 kHz/24-bit stereo WAV) 7:42:00 (192 kHz/24-bit stereo WAV) |
| CONNECTOR: | BNC |
| MODES: | Off, Int Free Run, Int Record Run, Int RTC Run, Ext, Ext Auto Rec (audio clock can be synchronized to timecode) |
| FRAME RATES: | 23.976ND, 24ND, 25ND, 29.97ND, 29.97D, 30ND, 30D |
| PRECISION: | ±0.2 ppm |
| SUPPORTED INPUT LEVELS: | 0.2 – 5.0 Vpp |
| INPUT IMPEDANCE: | 4.6 kΩ |
| OUTPUT LEVEL: | 3.3 Vpp |
| OUTPUT IMPEDANCE: | 50 Ω or less |
| BATTERIES: | 8 AA |
| AC ADAPTER: | AD-19 DC12V 2A (center plus) |
| EXTERNAL DC POWER SUPPLY: | HIROSE HR10A-7R-4S 4-pin connector (1 pin: −, 4 pin: +), 9–16 V |
| ALKALINE BATTERIES: | 8.5 hours or more |
| NIMH (2450MAH): | 10 hours or more |
| LITHIUM BATTERIES: | 12.5 hours or more |
| ALKALINE BATTERIES: | 4.5 hours or more |
| NIMH (2450MAH): | 6 hours or more |
| LITHIUM BATTERIES: | 8.5 hours or more |
| ALKALINE BATTERIES: | 1 hour or more |
| NIMH (2450MAH): | 2 hours or more |
| LITHIUM BATTERIES: | 3 hours or more |
| 2.4″ FULL-COLOR LCD: | 320×240 |
| CLASS: | USB 2.0 High Speed | |
| CLASS: | USB 2.0 High Speed |
| SPECIFICATIONS: | 44.1/48/96 kHz, 16/24-bit, 8-in/4-out |
| *Operation is not guaranteed with CPUs from Atom, Celeron or Pentium series or CPUs made by AMD |
| CLASS: | USB 2.0 Full Speed |
| SPECIFICATIONS: | 44.1/48 kHz, 16-bit, 2-in/2-out |
| Note: iPad audio interface operation supported (Stereo Mix mode only)*Operation is not guaranteed with CPUs from Atom, Celeron or Pentium series or CPUs made by AMD |
| MAIN UNIT: | 7.0 in. (W) × 5.5 in. (D) × 2.1 in. (H) 178.2 mm (W) × 140.3 mm (D) × 54.3 mm (H) |
| MAIN UNIT ONLY: | 2.1 pounds (960 g) |
