€869.00
The F8n’s 2.4-inch full-color backlit display with monochromatic mode makes field work equally easy in low or direct lighting.
The F8n has a built-in slate mic for recording comments as well as the ability to output a variable frequency tone signal.
The control panel features stop, search forward and search backward keys as well as illuminated play/pause and record buttons.
Each input features a built-in preamp with a dedicated gain control knob and a 6-segment LED level meter.
A USB port enables firmware updates, file transfer, and allows the F8n to be used as an 8-in/4-out USB audio interface operating at sample rates up to 96kHz.
The F8n provides 8 discrete inputs with locking Neutrik XLR/TRS combo connectors, allowing you to plug in any microphone, wireless pack, or line level device. Any input can also be used as a camera return.
Record on two SD/SDHC/SDXC cards, up to 512 GB each, simultaneously, allowing you to instantly backup or split recordings.
The unit’s 1/4″ headphone jack also comes with dedicated volume control.
The F8n provides four outputs: two Main Outs (on balanced TA3 mini-XLR jacks) for connection to external mixers and processing devices; and two Sub Outs (on a single unbalanced 1/8″ stereo mini-jack) for connection to a camera. The F8n also provides a selectable +4 dBu output.
The F8n can be powered by a 9-18V external DC power supply.
Timecode can be generated internally or transmitted from an external timecode generator.
Our proprietary 10-pin connector enables the use of interchangeable Zoom mic capsules, with optional extension cables that allow for remote positioning
| DUAL SD CARD SLOTS SUPPORTS: | 16MB–2GB SD cards, 4GB–32GB SDHC cards and 64GB–512GB SDXC cards |
| CONNECTORS: | XLR/TRS combo jacks (XLR: 2 hot, TRS: TIP hot) |
| INPUT GAIN: | +10 – +75 dB |
| INPUT IMPEDANCE: | 2 kΩ |
| MAXIMUM INPUT LEVEL: | +14 dBu (at 0 dBFS, limiter ON) |
| PHANTOM POWER: | +24/+48V 10mA maximum for each channel |
| INPUT GAIN: | -10 – +55 dB |
| INPUT IMPEDANCE: | 2.6 kΩ |
| MAXIMUM INPUT LEVEL: | +24 dBu (at 0 dBFS, limiter ON) |
| EQUIVALENT INPUT NOISE: | −127 dBu or less (A-weighted, +75dB input gain, 150Ω input) |
| FREQUENCY CHARACTERISTICS: | 10 Hz – 80 kHz +0.5dB/−1dB (192kHz sampling rate) |
| A/D DYNAMIC RANGE: | 120 dB typ (−60dBFS input, A-weighted) |
| CROSSTALK: | −90 dB or less (between adjacent channels, 1kHz) |
| MIC IN: | ZOOM mic capsule input (use disables Inputs 1/2) |
| SLATE MIC: | Built-in mic for voice memos can be assigned to tracks freely |
| CONNECTORS: | TA-3 connectors, balanced output (2: hot) |
| OUTPUT IMPEDANCE: | 150 Ω or less |
| REFERENCE OUTPUT LEVEL: | −10 dBV (normal output level), +4 dBu (Output Level: Line), 1 kHz, 600Ω load |
| MAXIMUM OUTPUT LEVEL: | +10 dBV (normal output level), +24 dBu (Output Level: Line), 1 kHz, 600Ω load |
| CONNECTOR: | 3.5mm stereo mini unbalanced output jack |
| OUTPUT IMPEDANCE: | 100 Ω or less |
| REFERENCE OUTPUT LEVEL: | −10 dBV (normal output level), −40 dBV (mic output level), 1 kHz, 10kΩ load |
| MAXIMUM OUTPUT LEVEL: | +10 dBV (normal output level), -20 dBV (mic output level), 1 kHz, 10kΩ load |
| CONNECTOR: | 1/4″ unbalanced stereo output jack |
| OUTPUT IMPEDANCE: | 15 Ω or less |
| MAXIMUM OUTPUT LEVEL: | 100mW + 100mW (32Ω load) |
| D/A DYNAMIC RANGE: | 106 dB typ (−60dBFS input, A-weighted) |
| SUPPORTED FORMATS: | 44.1/47.952/48/48.048/88.2/96/192kHz, 16/24-bit, mono/stereo//2-10ch poly, BWF and iXML |
| MAXIMUM SIMULTANEOUS RECORDING TRACKS: | 10 (8 inputs + stereo mix) |
| 8 (at 192kHz sampling rate) |
| SUPPORTED FORMATS: | 128/192/320kbps, 44.1/48kHz, ID3v1 tags |
| MAXIMUM SIMULTANEOUS RECORDING TRACKS: | 2 |
| USING A 32GB CARD: | 30:51:00 (48 kHz/24-bit stereo WAV) |
| 7:42:00 (192 kHz/24-bit stereo WAV) |
| CONNECTOR: | BNC |
| MODES: | Off, Int Free Run, Int Record Run, Int RTC Run, Ext, Ext Auto Rec (audio clock can be synchronized to timecode) |
| FRAME RATES: | 23.976ND, 24ND, 25ND, 29.97ND, 29.97D, 30ND, 30D |
| PRECISION: | ±0.2 ppm |
| SUPPORTED INPUT LEVELS: | 0.2 – 5.0 Vpp |
| INPUT IMPEDANCE: | 4.6 kΩ |
| OUTPUT LEVEL: | 3.3 Vpp |
| OUTPUT IMPEDANCE: | 50 Ω or less |
| BATTERIES: | 8 AA |
| AC ADAPTER: | AC adapter: AD-19 DC12V 2A (center plus) |
| EXTERNAL DC POWER SUPPLY: | HIROSE HR10A-7R-4S 4-pin connector |
| (1 pin: −, 4 pin: +), 9–18 V | |
| POWER CONSUMPTION: | 15 W |
| ALKALINE BATTERIES: | 6 hours or more |
| NIMH (2450MAH): | 8.5 hours or more |
| LITHIUM BATTERIES: | 12 hours or more |
| ALKALINE BATTERIES: | 3.5 hours or more |
| NIMH (2450MAH): | 6 hours or more |
| LITHIUM BATTERIES: | 8 hours or more |
| ALKALINE BATTERIES: | 1 hour or more |
| NIMH (2450MAH): | 2 hours or more |
| LITHIUM BATTERIES: | 3 hours or more |
| 2.4″ FULL-COLOR LCD: | 320×240 |
| CLASS: | USB 2.0 High Speed |
| CLASS: | USB 2.0 High Speed |
| SPECIFICATIONS: | 44.1/48/88.2/96kHz sampling rate, 16/24-bit , 8 in/4 out |
| CLASS: | USB 2.0 Full Speed |
| SPECIFICATIONS: | 44.1/48kHz sampling rate, 16-bit , 2 in/2 out |
| CLASS: | USB 2.0 High Speed |
| SPECIFICATIONS: | 44.1/48 kHz sampling rate, 16/24-bit , 10 in/4 out |
| *Note: iOS device audio interface operation supported (stereo mode only) |
| MAIN UNIT: | 7.0 in. (W) × 5.5 in. (D) × 2.1 in. (H) 178.2 mm (W) × 140.3 mm (D) × 54.3 mm (H) |
| WEIGHT | |
| MAIN UNIT ONLY: | 2.2 pounds (1000 g) |
