Description
Our best selling studio monitors just got better! Eris® 3.5BT media reference monitors deliver studio-quality sound in an elegant, compact form factor that makes them ideally suited for bedroom studios, video production, and high-fidelity gaming setups.
With 25 watts per side of onboard power, the Eris 3.5BT reference monitors pack a serious punch, while still delivering clear, accurate audio. The weave and nature of the Eris 3.5BT’s 3.5-inch woofer result in tight bass that you can feel, as well as cleaner overall sound. The one-inch silk-dome tweeter produces refined high-frequencies and is designed to radiate sound with a wide pattern, creating a large optimal listening area. Improved speaker voicing over previous designs delivers richer lows and a smoother crossover transition for articulate, accurate transient reproduction through the frequency range and a less-fatiguing listening experience.
A convenient front-panel knob sets the level of both the power amp and the loud, clear headphone amplifier, with its front-panel jack. With four types of inputs, including fast, reliable, stereo Bluetooth® 5.0 connectivity, it’s easy to connect just about any audio source to your Eris 3.5BT reference monitors. High- and low-frequency controls let you easily adjust your Eris speaker’s frequency response to compensate for the acoustics of your space and create the most accurate sonic reproduction possible.
Need a little more low end? Add an Eris Sub8 BT to build a perfectly matched 2.1 sound system that fits almost anywhere.
Features
- 3.5-inch, woven-composite, low-frequency transducer
- 1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
- Fast, reliable, stereo Bluetooth® 5.0 wireless input
- 50W (25W/side) Class AB amplification
- 80 Hz to 20 kHz frequency response
- 98 dB SPL (Peak, @ 1 meter)
- High- and low-frequency Acoustic Tuning controls
- Balanced, ¼-inch TRS inputs; unbalanced, ⅛-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel ⅛-inch output
- Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
- Power Saver mode (engages after 40 minutes)
- Comes with speaker wire, ⅛-inch TRS to stereo RCA cable, and stereo ⅛-inch TRS to ⅛-inch TRS cable
Electronics
-
Voltage – 220-240V EU
-
Wattage – 25 Watts (Each Speaker)
Hardware
-
Cabinet Material – Vinyl-Laminated, Medium-Density Fiberboard
Miscellaneous
-
Connection Type – IEC
Monitors
-
Protections – RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter -
Audio Controls – VolumeHigh Frequency (±6 dB, center 10 kHz, continuously variable)Low Frequency (±6 dB, center 100 Hz, continuously variable)
-
Peak SPL – 98 dB (@ 1 Meter)
-
Crossover Frequency – 2.8 kHz
-
Monitor Inputs – Bluetooth 5.0, 1- Stereo 1/8″, 2-Balanced 1/4” TRS, 2-Unbalanced RCA
-
HF Transducers – 1” Ultra Low Mass, Silk Dome Tweeter
-
LF Transducers – 3.5″ (8.89 cm) Woven Composite
-
Frequency Response – 80 Hz – 20 kHz
-
Input Impedance – 10 kΩ
-
Monitor Amplifier Power – 25 Watts (Each Speaker)