PreSonus FaderPort V2 USB Production Controller
PreSonus FaderPort V2 USB Production Controller - Image 2
PreSonus FaderPort V2 USB Production Controller - Image 3

PreSonus FaderPort V2 USB Production Controller

€195.00

Description

Features

  • Single touch-sensitive, 100 mm long-throw, motorized fader
  • Large, 360° button encoder
  • Complete recording-transport controls: Play, Stop, Fast Forward, Rewind, Record, Loop
  • Drop Marker, Next/Prev Marker, Next/Prev Event
  • General session controls: Undo/Redo, Arm All, Solo/Mute Clear, Click On/Off
  • Session Navigator provides quick control over Track Scrolling, Timeline Scrolling, and much more
  • Channel Controls: Level, Pan, Solo, Mute, Rec Arm
  • Automation Controls: Touch, Latch, Trim, Write, Read, Off
  • macOS®– / Windows®-compatible with native Studio One® support and HUI and Mackie Control Universal emulation
  • Footswitch input for hands-free start/stop (footswitch not included)
  • USB 2.0 connectivity

 

Computer system requirements:

Below are the minimum computer-system requirements for use for FaderPort®.

macOS®

  • macOS version 10.13 or later
  • 200 MB storage space for Universal Control (required for firmware updates)
  • Available USB port

Windows®

  • Windows 10 or later (64-Bit Only)
  • 200 MB storage space for Universal Control (required for firmware updates and low-latency ASIO support)
  • Available USB port

The above are the hardware system requirements for this product.
DAW software and Operating System requirements vary.

Click here for Studio One’s system requirements.

PreSonus® FaderPort has been tested and approved to work with the following software:

  • Native Mode
    • PreSonus Studio One® 3.5.6 with extension*** or Studio One 4.0.1 or later
  • HUI Emulation
    • Supported by Pro Tools 12 and higher
  • Mackie Universal Control Emulation**
    • Supported by Logic, Cubase, Nuendo, and Ableton

* A firmware update is currently required for full functionality. Please download and install the latest version of Universal Control and run the firmware updater when prompted. See the FaderPort Owner’s Manual for instructions.

** Users of third-party DAWs not listed that support the Mackie Control protocol, such as Reason, Bitwig Studio, and Reaper, should contact their DAW vendor for support.

*** For more information, please see https://support.presonus.com/hc/en-us/articles/360005017651-How-do-I-use-new-FaderPort-with-Studio-One-3-5-6-.

As a commitment to constant improvement, PreSonus Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.​​

Technical Specifications

Input / Output
1 USB 2.0 port
1 Footswitch jack for hands-free stop/start

Faders
1 100 mm long-throw, touch-sensitive, motorized fader
Dual-servo motorized drive belt system for fast and quiet operation
Ultra-smooth feel and lightning fast
Heavy-duty construction
Resolution: 10-bit, 1,024 steps

Buttons and Knobs
General Controls 360° button encoder, Undo/Redo, Arm All, Solo/Mute Clear, Click On/Off, 4 Function buttons, Parameter Link, Bypass Plug-ins
Channel Controls Level, Pan, Solo, Mute, Rec Arm
Automation Controls Touch, Latch, Trim, Write, Read, Off
Transport Play, Stop, Fast Forward, Rewind, Record, Loop, Return to Zero (Functionality varies slightly, depending on the DAW.)
Navigation Track Scroll, Timeline Scroll, Horizontal Zoom, Vertical Zoom, Drop Marker, Pre/Next Marker, Prev/Next Event, Scrub, Nudge

Power
Motorized fader requires 12 VDC, 1.2A external power supply (factory configured, included)

Physical
Dimensions
Height 1.8” (45 mm)
Depth 5.5” (140 mm)
Width 9” (230 mm)
Weight 1.5 lb. (0.68 kg)

Related products

Copyright © 2024 Knight Music Ltd. 

Company Registration Number C41101.

Web Design & Development by Whale, Malta.
By proceeding further to this site you are agreeing to our Cookie Policy
I Understand